Welcome: Shenzhen Pinwei Technology Co.,Ltd
Language: Chinese ∷  English

HDMI Wireless Extender

  1. PW-DT212W 100M Wireless HDMI Extender H.264 encode
  2. PW-DT212W 100M Wireless HDMI Extender H.264 encode
PW-DT212W 100M Wireless HDMI Extender H.264 encodePW-DT212W 100M Wireless HDMI Extender H.264 encode

PW-DT212W 100M Wireless HDMI Extender H.264 encode

  1. 50-100M
  2. H.264 encode
  3. 20-60KHz IR
  4. Loopout
  5. Product description:
PW-DT212W 100M Wireless HDMI Extender H.264 Encode
1. Decription
This Wireless HD Video Solution enables wireless transmission of video/audio from any HDMI video source , such as PC/HDTV to display devices that includes HDTV/HD Monitor over the 2.4GHz/5.8GHz band, with very low latency. It does not require any special configuration of software driver installation-simply connect the transmitter to the HDMI output of the video source and the receiver to the HDMI input of the Panel/TV/Monitor. Its Plug & Play operation makes it the ultimate solution for the most demanding indoor/outdoor professional environments. This Wireless HD Video Transmission Solution is widely applicable to family entertainments, office presentation, lecture, education, medical treatment, party, conference etc.
2. Features:

  • Apply H.264 technology.
  • Support HD devices with HDMI input/output, include Blu-ray player, DVD player, PC, laptop, HDTV etc.
  • Support resolution: 480i@60Hz, 480P@60Hz, 576i@50Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz, 1080P@50/60Hz
  • Support wide infrared remote control function to control source device content from long distance.
  • Latency≤200ms in without obstacle room.Usually latency is 0.4s in the obstacle and wifi room.
  • Transmitter have one local loop out.
  • Support 1 TX to 2 RX.
  • Effective Range: 200m/656ft in 2.4G, 120meters in 5.8G in the outdoor empty and without obstacle environment, usually 50meters.
  • could pass through 1 solid wall between the two rooms within 15-20mtr. The user can select 2.4g or 5.8g on button
  • No cable between sender (TX) and receiver (RX)
  • Easy and clean installation
  • Plug & Play full hardware design, no software is required
  • Note:
    Transmission distance will be different due to the environment if you use in build where is already have wifi, 5G is better.
    Wall, brick or glass will shorten the signal cover range or cause big signal loss

    3. Specification
    Parameter Description
    Video Standard Protocol HDMI 1.3; HDCP 1.2
    Maximum pixel clock 165MHz
    Maximum data rate 6.75Gbps
    Resolution 480i@60Hz,480P@60Hz,576i@50Hz, 576P@50Hz,720P@50/60Hz,1080i@50/60Hz, 1080P@50/60Hz
    Connector HDMI-A
    Impedance 100Ω
    Compress Formats H.264
    IR Interface 3.5mm earphone seat
    Signal direction Unidirectional
    IR frequency 20-60kHz
    WIFI Frequency 2.4GHz/5.8GHz
    Transmission distance Max :200m/656ft
    Wireless Standard RX- 802.11AC; TX-802.11N on 5Ghz, 802.11G on 2.4Ghz
    Other Power supply The power adapter: DC 5V/2A
    Power dissipation MAX 6W
    Temperature Operating: -5 ~ +70
    Humidity Operating: 5% ~ 90%
    Dimension 120*82*25mm
    The warranty 1 year warranty

    4. Panel
    Port name Description
    HDMI IN/OUT HDMI signal input/output
    IR IN/OUT IR signal input/output
    DC IN Power adapter socket
    Channel Display Channel
    Back Down UP OK Key Adjust 2.4G/5.8GHz channel.
    LED indicator Description
    STATUS Video signal connection indicator
    POWER System power indicator

    5. Installation

    1.Back: return the last step. 2.Down: Press “ Down” key , the number display on “ Channel” will be down ,for example “5.8 “ to “5.7” 3. Up: press “ Up” key ,the number display on “ Channel” will be up ,for example “ 5.7” to “ 5.8” 4. OK : after changed the channel ,need to press “ OK ” key .if not ,after 3 seconds ,will back to last channel . 5. Channel: display the channel number . for example 2.4G:  2.0  2.1  2.2  2.3  2.4  2.5  2.6  2.7  2.8 5G :   5.0  5.1  5.2  5.3  5.4  5.5  5.6  5.7  5.8
    6. Using Application

    1 to 1
    1 to 3

    Packing list